White Willow Bark P.e.|Ronas Chemicals Ind.Co.,Ltd.

MSDS of White Willow Bark P.e.

Material Safety Data Sheets of White Willow Bark P.e.

Section 1 - Compositon/Information on Ingredients
Ingredient Name: White willow bark extract
Specification: 15%,25% Salicin

Section 2 - Hazards Identification, Including Emergency Overview
Adverse Effects: Adverse effects may include gas, bloating, and heartburn. Possible allergic reaction to material if inhaled, ingested or in contact with skin.
Overdose Effects: Ingestion of large amounts may cause cardiac arrhythmias and central nervous depression.
Acute: Possible eye, skin, gastrointestinal and/or respiratory tract irritation.
Chronic: Possible hypersensitization.
Medical Conditions Aggravated by Exposure: Hypersensitivity to material, bleeding problems, and gallstones.
Cross Sensitivity: n/f
Target Organs: n/f
For additional information on toxicity, see Section 11.

Section 3 - First Aid Measures
Inhalation: May cause irritation. Remove to fresh air.
Eye: May cause irritation. Flush with copious quantities of water.
Skin: May cause irritation. Flush with copious quantities of water.
Ingestion: May cause irritation. Flush out mouth with water.
General First Aid Procedures: Remove from exposure. Remove contaminated clothing. Persons developing serious hypersensitivity
(anaphylactic) reactions must receive immediate medical attention. If person is not breathing give
artificial respiration. If breathing is difficult give oxygen. Obtain medical attention.
Note to Physicians
Overdose Treatment: n/f

Section 4 - Fire Fighting Measures
Extinguisher Media: Water spray, dry chemical, carbon dioxide or foam as appropriate for surrounding fire and material.
Firefighting Procedures: As with all fires, evacuate personnel to a safe area. Firefighters should use self-contained breathing equipment and protective clothing.
Fire and Explosion Hazards: This material is assumed to be combustible. As with all dry powders it is advisable to ground mechanical equipment in contact with dry material to dissipate the potential buildup of static electricity.

Section5 - Accidental Release Measures
Spill Release Procedures:
Wear approved respiratory protection, chemically compatible gloves and protective clothing. Wipe up spillage or collect spillage using a high efficiency vacuum cleaner. Avoid breathing dust. Place spillage in appropriately labeled container for disposal.

Section 6 - Handling and Storage
Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Avoid contact with skin, eyes and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage: Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances. Store in a tightly closed container.

Section 7 - Exposure Controls & Personal Protection
Engineering Controls:
Safety shower and eye bath. Mechanical exhaust required. Use non-sparking tools.
Personal Protective Equipment:
Respiratory: government-approved respirator.
Hand: compatible chemical-resistant gloves.
Eye: chemical safety goggles.
General Hygiene Measures:
Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section 8 - Physical & Chemical Properties
Appearance:Green brown;
Odor Threshold: n/f
pH: n/f
Melting Range: n/f
Boiling Point: n/f
Flash Point: n/f
Autoignition Temperature: n/f
Evaporation Rate: n/f
Vapor Pressure: n/f
Percent Volatile: n/f
Upper Flammability Limit: n/f
Lower Flammability Limit: n/f
Fat Solubility: n/f
Other Solubility: n/f
Partition Coefficient: n-octanol/water: n/f
Explosive Properties: n/f
Oxidizing Properties: n/f

Section 9 - Stability & Reactivity Data
Stability Indicator: Stable under normal temperatures and pressures.
Materials to Avoid: Incompatible materials, ignition sources, excess heat.
Hazardous Decomposition Products: carbon monoxide, carbon dioxide.
Hazardous Polymerization : Has not been reported.

Section 10 - Toxicological Information
LD50/LC50: Not available.
Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.

Section 11 - Ecological Information
Ecological Information: n/f

Section 12 - Disposal Considerations
Waste Disposal Methods:
Dispose of waste in accordance with all applicable Federal, State and local laws.

Section 13 - MSDS Transport Information
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 14 - Regulatory Information
Health& Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.

Section 15 - Other Information
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.